ABOUT      CONTACT      HOME

 

Take THQZ610460 as an example,Automatic plastic thermoforming machine Performance and Advantage:

1. Power saving: Single machine running, it is 3 kw per hour. Add punching machine and air compressor, the whole production process just cost 7 kw electricity.

2. Leftover material saving: the leftover material is 5mm per side. If inputted raw material 1000kg, the finished product can be 900kg, which is using the material in the largest extent. But other’s blister machine will cost at least 2cm each side. It means totally 8cm scraps are going to be wasted. BOPS sheet and PVC new sheet are suitable for use.

3. Worker saving: it does not need a few master workers but a general worker can operate the whole production process including stamping and packing product.

4. Stable performance: the operation is different from traditional high speed machine, according to different material and different thickness, it can be repaired, time relay deployed, mould changed, material changed, temperature controlled by skilled worker.

5. Mould: the mould’s price is reasonable, which is using the imported Aluminium material. No deformation permanent. Mould replacement is simple.

6. Imported accessories: the heart part of machine- Magnetic valve, Brand: CKD SMC imported from JAPAN. It can make our machine more stable than others.

7. Large daily output: 1 ton for PVC material (medicine tray injection tray 2ml)/ 0.5 ton for Bops material (moon cake box)

Mainly technical parameter:

THQZ610460 Automatic plastic thermoforming machine
Specification of using sheet Width 460mm-610mm Working efficiency 10-15 times/min
Thickness 0.1-1.0mm Gas Consume(outside gas source) 1.0m³/min
Roll diameter 500mm Pressure 0.8MPa
Model area Max 600×460 Electric power (three-phase four-wire) 380V 7KW
Min 350×510 Water Consume about 1m³/h
Model height Max 80mm Machine size(L*W*H) L3200mm×W900mm×H1800mm
Machine Weight 1000kg
THQZ610510 Automatic plastic thermoforming machine
Specification of using sheet Width 610-710mm Working efficiency 10-15 times/min
Thickness 0.1-1.0mm Gas Consume(outside gas source) 1.2m³/min
Roll diameter 500mm Pressure 0.8MPa
Model area Max 610×510 Electric power (three-phase four-wire) 380V 8.6KW
Min 410×510 Water Consume about 1m³/h
Model height Max 120mm Machine size(L*W*H) L3400mm×W1000mm×H2000mm
Machine Weight 1800kg
THQZ710610 Automatic plastic thermoforming machine
Specification of using sheet Width 610-710mm Working efficiency 10-15 times/min
Thickness 0.1-1.0mm Gas Consume(outside gas source) 1.5m³/min
Roll diameter 500mm Pressure 0.8MPa
Model area Max 610×710 Electric power (three-phase four-wire) 380V 10.2KW
Min 510×610 Water Consume about 1m³/h
Model height Max 120mm Machine size(L*W*H) L3800mm×W1080mm×H2100mm
Machine Weight 2200kg

Popular products:Pressure Thermal Forming Machine | seedling tray molding machine | Food packaging machinery | Food Packing | Extruder Sheet | Pharmaceutical ETC

Contacts:Mr Zheng Tel:13706555699 0576-87145738-8007

Copyright©2010-2011 TAIZHOU TIANHUA PLASTICS MACHINERY CO.,LTD.